VO-4e Control Inputs and Outputs

In addition to the Audio Inputs, the VO-4e supports four Control Input connections and four Control Output connections. The Control Ports can be configured in the VO-4 Properties window by selecting the Control icon. The Control Ports can be assigned with a Control Input Event or Control Output Event function.

The Control screen is separated into two sections. The top section is used to configure Control Inputs and the bottom section used to configure Control Outputs.

Control Inputs

Inputs are discrete, meaning only one Control Input Event can be assigned at a time.

The Name and Description columns allows each of the four Input and Output channels to be associated with the physical input and output configuration of the device.

An Active State can be configured as a High, Low, Toggle High and Toggle Low trigger. A Lower Threshold and Upper Threshold can also be specified. Upper and Lower Thresholds can be specified to set the digital level that the Control Inputs will activate.

The Control Event field can be used to select a Control Handle, Page Code, User Input, System Mute, Zone State Control Event or if the Control Input is to be Disabled.

The Assigned Value field can be used to configure additional options for the selected Control Event.

For further details on Control Input Events please refer to the Control Input Events section.

Control Outputs

Outputs are discrete, meaning only one Control Output Event can be assigned at a time.

The Name and Description columns allow users to associate each of the four Output channels with the physical output configuration of the device.

An Active State can be configured as a High, Low, Pulse High and Pulse Low trigger. If a Pulse is selected a Pulse Time can also be specified.

The Control Event field can be used to select a Paging Activity, Control Handle, Emergency Message, Emergency Indicator, Page Code or Channel Active

The Assigned Value field can be used to configure additional options for the selected Control Event.

For further details on Control Output Events please refer to the Control Output Events section.