To communicate with the TTS-1e via VTP a VTP User Account will need to be set up. Create a New User and assign a password in the fields provided. Please note that both the User Name and Password are case sensitive, limited to 16 characters and cannot not contain spaces.
Once you have set up a VTP User Name and Password, send the configuration to the Vocia devices over the network. After this action is completed you can connect to the VTP service using:
TCP
Port 8020
IP Address of the TTS-1e
The TTS-1e will act as a VTP proxy for MS-1e VTP Commands. If TTS Sequences are triggered via VTP, the TTS-1e should be used as the primary VTP Interface for MS VTP and TTS VTP Commands.
The RS-232 port is used to connect Nurse Call systems on TTS-1nce units and is not used for VTP control. Please refer to the wiring and interfacing information in the TTS-1e General section